Single 250W LED imaging light Guangzhou Zhenghe Photoelectric Technology Co., Ltd.

Single 250W LED imaging light ZH-TV2519

Introduction

Parameter

Lighting effect

Product size

Video demo

Manual download

1. The light spot is uniform and equal to the brightness ＆#118alue, which can cut any irregular light spot;

2. 16-bit dimming: Compared with 8-bit dimming, the light changes are softer, more delicate and smooth;

3. The system has two operating modes: DMX mode and manual dimming;

4. The software version number is displayed when the system is powered on, and after 1 second, it enters the operating mode saved before the last power down;

5. After modifying the DMX address, DIMMER ＆#118alue, and operating mode, the system will automatically save these parameters after 3 seconds. The saved parameters will not be lost when power off;

★6. Color rendering index: CRI≥95;

7. Rf≥ 92.5 has a good ability to restore colors, and restore the original colors of items;

Rg≥ 98 The light spot is very uniform and the color is rich and saturated, and there is no noise;

Ra≥96.7 is as close to sunlight as the reference light source incandescent lamp.

★8. It can be matched with any power bank and charging power supply, and the address code of the lamp can be adjusted without powering the lamp, which is convenient and flexible to use.

★9. Dimming: with dimming knob; 1.8-inch TFT LCD color screen + dot matrix buttons

★Protocol: DMX protocol, RDM protocol, software version can be upgraded through three-core and five-core signal lines.

★Light source: single ≥250W COB imported integrated lamp beads

Light source life: 10,000 hours

Power supply: AC100-250V, 50/60Hz

Dimming: Both manual and DMX dimming of the same lamp can be used

Color temperature: 3200K/5600K optional

Total power: 300W

Angle: 19, 26 degrees optional

★Optics: ≥5 combined glued lenses, effectively reducing chromatic aberration, spherical aberration and phase aberration

★The LED imaging light can be interchanged with the LED spotlight optical lens, which can be used flexibly on site.

Control channel: 1/2CH channel