Single 500W LED imaging light Guangzhou Zhenghe Photoelectric Technology Co., Ltd.

Single 500W LED imaging light

Introduction

Parameter

Lighting effect

Product size

Video demo

Manual download

Name: Single 500W LED imaging light

Model: ZH-TV5019

1. The light spot is uniform and equal to the brightness ＆#118alue, which can cut any irregular light spot;

2. 16-bit dimming: Compared with 8-bit dimming, the light changes are softer, more delicate and smooth;

3. The system has two operating modes: DMX mode and manual dimming;

4. The software version number is displayed when the system is powered on, and after 1 second, it enters the operating mode saved before the last power down;

★5. Heat dissipation system: Intelligent fan adjustment system dynamically adjusts the strength of the fan according to the lamp bead temperature to ensure that the lamp works for a long time and ensure that the lamp body temperature is kept in the best state.

★6. Color rendering index: CRI≥95;

7. Rf≥ 92.5 has a good ability to restore colors, and restore the original colors of items;

Rg≥ 98 The light spot is very uniform and the color is rich and saturated, and there is no noise;

Ra≥96.7 is as close to sunlight as the reference light source incandescent lamp.

★8. It can be matched with any power bank and charging power supply, and the address code of the lamp can be adjusted without powering the lamp, which is convenient and flexible to use.

★9. Dimming: with dimming knob; 1.8-inch TFT LCD color screen + dot matrix buttons

★Protocol: DMX protocol, RDM protocol\The software version can be upgraded through three-core and five-core signal lines

★Light source: single ≥500W COB imported integrated lamp beads

Light source life: 10,000 hours

Power supply: AC100-250V, 50/60Hz

Dimming: Both manual and DMX dimming of the same lamp can be used

Color temperature: 3200K/5600K/four in one optional

Total power: 550W

Angle: 19 degrees

★Optics: ≥5 combined glued lenses, which can effectively reduce chromatic aberration, spherical aberration and phase aberration.

★The LED imaging light can be interchanged with the LED spotlight optical lens, which can be used flexibly on site.

Control channel: 1 channel (can be customized)